T150 trail camera upgrade steps

Steps to upgrade the T150 trail camera to 4K

 Preliminary preparation:

1: A 8G or 16G or 32G micro SD card
2: A card reader
3: Upgrade package (please download the upgrade package here)
4: T150 camera charged to 50% and above
5: A computer with Windows system

Flashing
1. First decompress the decompressed package through the computer
Insert the prepared memory card into the computer through the card reader and format it on the computer;

Copy the file FW96675A.bin to the root directory of the memory card, and unplug the memory card after copying;

Insert the memory card with the upgraded software when the T150 is turned off, then press and hold the OK button for 3S while turning the power switch to SETUP mode, then release the OK button to check whether the indicator light on the front of the camera is flashing red, if it is red If it blinks, it means that the camera is currently being upgraded. If it doesn’t blink, it cannot be upgraded. Please follow the above steps to start again;

After flashing, you can enter the camera system settings to check the version number of the camera.
The upgraded version number is: Camppark T150210726.45